Saar Lagertechnik Roller Track Modules

Roller-tracksModulesComponents Accessories Production Examples

Unloading module

Intermediate modules with the same technical format can be combined with differing loading and unloading modules. This allows the lanes to suited to different stackers.

Unloading modules with continuous rollers with spacings of 156mm, 130mm, 104mm, 78mm, depending on the type and weight of the carrier for unloading with a FLT with inclining mast or forks.

Three-section unloading module, front part, with roller spacings of 156mm, 130mm, 104mm, 78mm depending on the type and weight of the carrier for unloading pallets with a FLT with inclining mast or forks.

The unloading modules are always set up for two pallets places, the following module is simply a standardised intermediate module.

Three-section unloading module for hand pallet lift trucks,

Can be fitted as an option with approach ramps to make unloading easier with e.g. half-pallets
This module can also be used for other handling and lifting equipment
The three-section tracks can be taken out of their mountings without tools or effort for cleaning.
If powered equipment is used, a specially reinforced version can be fitted.

Intermediate modules

Intermediate modules for two pallets. The modular system is constructed so that all intermediate modules within one track are exactly the same. The intermediate module for a pallet corresponds exactly to the roller and brake-roller spacings for two pallets so that the sequence of the modules in the track can be freely selected.

Loading modules

Loading modules, with continuous rollers, roller spacings of 156mm, 130mm, 104mm, 78mm depending on the type and weight of the carrier for loading pallets by FLT with a tilt-mast or forks.

Three-section unloading module, roller spacings 156mm, 130mm, 104mm, 78mm, depending on the type and weight of the carrier, for loading pallets by FLT without tilt- mast or forks.