Saar Lagertechnik Roller lanes: accessories

Screw plate

for fixing the tracks to a closed beam or similar profile.

• The plate is automatically brought into the correct angle by a notch on the underside
• Elongated holes permit later alignment
• Further fixing materials are not necessary if the joints are on the beams
• There is also a version available for an I-profile

Rail connecting clips

• Join two track rails to a single unit
• Make joints outside beams possible
  
  
  

Roller protection

at the loading side

• Are used when the tracks at the loading end are not positioned on a beam
• Protects the rollers from the forks of the FLT
• Covers up sharp edges of the rails
• Upper edge is 5mm lower than the rollers

End stop

at the unloading side

• Are used when the tracks at the unloading side are not positioned on a beam
• Protects the rollers from the FLT
• Covers up sharp edges of the rails
• Upper edge is 5mm lower than the rollers
• The pallet is gradually slowed down over the last 50mm to allow an especially smooth stop

Entry guides

fixed to the racking

• Allows pallets to be centred more easily
• Specially stable version fixed to racking
• A version for fixing to lanes is also available

Upright protectors

when hand pallet lift trucks are used

Approach ramp

for manual removal and when electric powered pallet trucks are in operation

Substructure

adjustable in height for tracks at floor level